Quantcast
Channel: VOIP-info.org Page Changes
Viewing all articles
Browse latest Browse all 2667

NeoGate-ISDN VoIP Gateway

$
0
0
Diff from version 1 to 1 (current)

@@ -1 +1,122 @@

+!NeoGate TE100 - VoIP PRI Gateway(VoIP-E1/T1/J1)
+!!Bridge the gap between E1/T1/J1 and VoIP networks
+NeoGate TE100 is a single port VoIP E1/ T1 /J1 gateway (VoIP to E1/ T1 /J1, and E1/ T1 /J1 to VoIP) that supports up to 30 concurrent calls. It s designed to bridge the gap between E1/ T1 /J1 and VoIP networks. TE100 offers SMBs cost effective additions to an legacy telephone system to bring the true benefits of VoIP. Integrating TE100 into an existing network will allow for inexpensive communication via SIP trunking. Also, it could connect VoIP systems with E1/T1/J1 service from legacy carriers.
 
+!{attachment id=4681}
+
+!!Benefits
+1) Cost-effective Call Routing
+2) Easy-to-navigate GUI
+3) Simple Installation
+4) Easy to integrate
+5) Low power consumption for your green office
+
+!!Specification:
+E1/T1/J1 Port: 1 (Support PRI, MFC R2, SS7)
+Protocol: SIP (RFC3261)
+Transport Protocol: UDP,TCP,TLS,SRTP.
+DTMF: RFC2833, SIP INFO, In-band
+Codec: G.711 a/u-law, G.722, G.726, G.729 A, GSM.
+LAN: 10/100 Mbps
+WAN: 10/100 Mbps
+
+Size: 213x160x44mm
+Power Supply: AC 100~240V,50~60Hz (DC 12V, 1A)
+
+!!Features:
+Trunk Support
+Call Routing Rules
+Automatic appending and stripping of digits to dialed numbers
+Caller ID name and number support
+FAX support
+Blacklist
+Firewall
+DDNS Support
+Backup And Restore
+Easy to install
+
+!!Applications
+1) Connect legacy PBX systems to VoIP services
+2) Connect legacy PBX systems to remote sites over private VoIP links
+3) Connect IP PBX systems to legacy TDM services
+4) Phased transition from Legacy PBX to IP PBX
+
+---
+
+!NeoGate TE200 - VoIP PRI Gateway(VoIP-E1/T1/J1)
+!!Bridge the gap between E1/T1/J1 and VoIP networks
+NeoGate TE200 is a dual port VoIP E1/ T1 /J1 gateway (VoIP to E1/ T1 /J1, and E1/ T1 /J1 to VoIP) that supports up to 60 concurrent calls. It s designed to bridge the gap between E1/ T1 /J1 and VoIP networks. TE200 offers SMBs cost effective additions to an legacy telephone system to bring the true benefits of VoIP. Integrating TE200 into an existing network will allow for inexpensive communication via SIP trunking. Also, it could connect VoIP systems with E1/T1/J1 service from legacy carriers.
+
+!{attachment id=4682}
+
+!!Benefits
+1) Cost-effective Call Routing
+2) Easy-to-navigate GUI
+3) Simple Installation
+4) Easy to integrate
+5) Low power consumption for your green office
+
+!!Specification:
+E1/T1/J1 Port: 2 (Support PRI, MFC R2, SS7)
+Protocol: SIP (RFC3261), IAX2
+Transport Protocol: UDP,TCP,TLS,SRTP.
+DTMF: RFC2833, SIP INFO, In-band
+Codec: G.711 a/u-law, G.722, G.726, G.729 A, GSM.
+LAN: 10/100 Mbps
+WAN: 10/100 Mbps
+
+Size: 213x160x44mm
+Power Supply: AC 100~240V,50~60Hz (DC 12V, 1A)
+
+!!Features:
+Trunk Support
+Call Routing Rules
+Automatic appending and stripping of digits to dialed numbers
+Caller ID name and number support
+FAX support
+Blacklist
+Firewall
+DDNS Support
+Backup And Restore
+Easy to install
+
+!!Applications
+1) Connect legacy PBX systems to VoIP services
+2) Connect legacy PBX systems to remote sites over private VoIP links
+3) Connect IP PBX systems to legacy TDM services
+4) Phased transition from Legacy PBX to IP PBX
+
+---
+
+!NeoGate TB400 - VoIP BRI Gateway(BRI-VoIP)
+!!Flexible routing for your PBX
+NeoGate TB400 - VoIP BRI Gateway(BRI-VoIP) is a full-featured VoIP gateway. It's used to integrate your PABX to
+VoIP service or extend an ISDN-BRI line of a PBX to a remote site over VoIP.
+
+!{attachment id=4523}
+
+!!Benefits
+1) Access to VoIP network
+2) Cost Saving - Cost-Saving on phone calls via VoIP.
+3) Easy to install - IP device with Web based management interface.
+4) Easy to integrate.
+
+!!Specification:
+BRI Port: Up to 4 (RJ45)
+Protocol: SIP (RFC3261), IAX2
+Transport Protocol: UDP,TCP,TLS,SRTP.
+DTMF: RFC2833, SIP INFO, In-band
+Codec: G.711 a/u-law, G.726, G.729 A, GSM, Speex.
+
+Network: DHCP, Firewall, VLAN, DDNS, OpenVPN.
+
+Size: 200x140x35mm
+Power Supply: AC 100~240V/50~60Hz (DC 12V, 1A)
+
+!!Features:
+BRI ports can be used as TE/NT mode
+SIP proxy Registrar for IP phones included
+LCR (Least Cost Routing)
+Simple web based configuration
+Easy to integrate
+Easy to install
UserCommentTimeVersion
michaelchan2014-06-04 07:561

Viewing all articles
Browse latest Browse all 2667

Trending Articles